Receptor Grade IGF-1 LR3 (100mcg): A Potent Analogue for Cell Growth & IGF Receptor Studies

If your research focuses on cellular proliferation, IGF-1 receptor signalling, or the mechanisms of anabolic growth, Receptor Grade IGF-1 LR3 (100mcg) is a reagent that demands your attention. Long Arg3 IGF-1 (LR3-IGF-1) is a synthetic analogue of human insulin-like growth factor 1, engineered for enhanced biological potency and stability. Unlike native IGF-1, which is rapidly bound and neutralised by IGF-binding proteins (IGFBPs) in culture media and biological fluids, LR3-IGF-1 has been specifically modified to minimise this interaction. The result is a research tool that delivers sustained, high-level activation of the type 1 IGF receptor, driving robust signalling through the PI3K/AKT and ERK1/2 pathways.

At Wuhan Top Miracle Peptides, we supply high-purity Receptor Grade IGF-1 LR3 (100mcg) to research institutions and wholesale buyers across the United Kingdom, France, Germany, Spain, Sweden, Italy, and the USA. Every batch is lyophilised, HPLC-verified to ≥95% purity, and accompanied by a Certificate of Analysis (COA), ensuring your studies into cell growth, receptor pharmacology, and metabolic regulation begin with uncompromising quality.

What Is Receptor Grade IGF-1 LR3 and How Does It Work?

To fully appreciate the research potential of Receptor Grade IGF-1 LR3 (100mcg), it is essential to understand its molecular design and the mechanism by which it achieves enhanced potency.

The LR3 Modification: Structural Engineering for Enhanced Potency

LR3-IGF-1 is an 83-amino-acid analogue of human IGF-1. It comprises the complete human IGF-1 sequence with two key modifications:

• Arginine Substitution at Position 3: The glutamic acid (Glu) at position 3 of native IGF-1 is replaced with arginine (Arg). This substitution is responsible for the “R3” designation and significantly reduces the peptide’s affinity for IGF-binding proteins.

• N-Terminal Extension: A 13-amino-acid extension peptide is added at the N-terminus, further enhancing the peptide’s stability and biological activity.

These modifications result in an analogue with >100-fold reduced affinity for IGFBPs compared to native IGF-1. Since IGFBPs normally sequester and inhibit the biological actions of IGFs, this reduced binding translates directly into enhanced potency and a significantly prolonged half-life in cell culture and experimental models.

Mechanism of Action: Sustained IGF-1 Receptor Activation

The biological activity of Receptor Grade IGF-1 LR3 (100mcg) is rooted in its ability to provide sustained, high-level activation of the type 1 IGF receptor:

• Receptor Binding with Similar Affinity: LR3-IGF-1 binds to the type 1 IGF receptor with affinity similar to that of wild-type IGF-1.

• Enhanced Signalling Activation: Because it is not rapidly neutralised by IGFBPs, LR3-IGF-1 achieves a higher level of receptor occupancy and thus induces a more robust activation of intracellular signalling molecules.

• Downstream Pathway Activation: This leads to potent activation of the PI3K/AKT pathway (promoting cell survival and inhibiting apoptosis) and ERK1/2 signalling (driving proliferation and differentiation).

• Promotion of Cell Survival: By activating these pathways, LR3-IGF-1 promotes cell survival through the inhibition of apoptosis.

Key Research Applications for Receptor Grade IGF-1 LR3 (100mcg)

Receptor Grade IGF-1 LR3 (100mcg) is a versatile tool with applications spanning several domains of cellular and molecular research.

Cell Proliferation & Survival Studies

The most established application of LR3-IGF-1 is in studying the mechanisms of cell growth and proliferation across diverse mammalian cell lines. By binding to the IGF-1 receptor and activating downstream signalling cascades, it enables researchers to dissect the molecular underpinnings of mitogenesis and survival. Its enhanced resistance to IGFBPs ensures sustained receptor engagement, providing robust and reproducible stimulation in cell culture models. This property is particularly advantageous in experiments aiming to elucidate the roles of growth factors in tissue development, cancer biology, and regenerative processes.

 IGF Receptor & Signal Transduction Research

The peptide’s capacity to activate IGF-1 receptor-mediated signalling makes it an indispensable reagent for probing intracellular pathways involved in metabolism, apoptosis, and gene expression. Researchers frequently employ IGF-1 LR3 to delineate the differential effects of IGF-1 analogues on downstream effectors, providing insights into the specificity and redundancy of growth factor signalling.

 Stem Cell & Regenerative Medicine Research

IGF-1 LR3 is widely used in stem cell research to support the expansion and maintenance of various stem cell populations. It has been shown to regulate lymphopoiesis by stimulating the proliferation and differentiation of T and B cells in lymphoid organs. Together with other growth factors, IGF-I stimulates the differentiation and proliferation of myeloid cells.

Neuroscience & Neuroprotection Research

Emerging research has investigated LR3-IGF-1 in the context of neurological conditions. A 2024 study published in the Journal of Alzheimer’s Disease examined intranasal LR3-IGF-1 treatment in a mouse model of Alzheimer’s disease. The study found that LR3 treatment promoted favourable effects on Aβ plaque remodelling in the cortex and enhanced the uptake of Aβ peptide by microglial cells in vitro. While the study did not support LR3 as a monotherapy, it warranted further investigation into its potential for combinatorial formulations.

Muscle, Bone & Cartilage Research

As a mitogenic polypeptide growth factor, IGF-1 LR3 stimulates the proliferation and survival of various cell types, including muscle, bone, and cartilage tissue in vitro. Experimental infusion of LR3-IGF-1 into late-gestation fetal sheep has been shown to increase fetal organ growth and skeletal muscle myoblast proliferation. This positions LR3-IGF-1 as a valuable tool for studying musculoskeletal development and regeneration.

Biopharmaceutical Manufacturing & Cell Culture Optimisation

LR3-IGF-1 was specifically developed for supplementation of mammalian cell culture to support the survival and proliferation of cells. Supplementation of cell cultures with LR3-IGF-1 at a much lower concentration results in equivalent or better productivity than supplementation with standard concentrations of insulin. This makes it an ideal choice for both research and large-scale culturing of CHO, ES, NK, HSC, MSC, fibroblast, hybridomas, and many other cell types.

Chemical & Physical Specifications

Accurate characterisation of Receptor Grade IGF-1 LR3 (100mcg) is essential for reproducible experimental design. Below are the verified specifications from multiple research suppliers.

Note on Purity: The 100 mcg mass refers to the weight of the protein in its lyophilised form. Receptor Grade indicates a high-quality research reagent specifically developed for studies on cell growth, IGF receptors, and IGF-binding proteins.

Reconstitution & Handling Protocol for Receptor Grade IGF-1 LR3 (100mcg)

Proper reconstitution of Receptor Grade IGF-1 LR3 (100mcg) is critical for maintaining its structural integrity and biological activity. This protocol is designed for research use only.

Step 1 – Preparation

• Bring the sealed LR3-IGF-1 vial and your chosen diluent to room temperature.

• Recommended diluent: Sterile 0.1M acetic acid or sterile PBS (pH 5–7) containing 0.1% carrier protein (e.g., BSA or HSA) to prevent adsorption to surfaces.

• Clean your work surface with 70% ethanol and lay out sterile syringes, alcohol wipes and a clean work mat.

Step 2 – Vial Sanitisation

• Wipe the rubber stopper of the LR3-IGF-1 vial with a fresh 70% ethanol wipe. Allow the alcohol to evaporate completely before piercing.

Step 3 – Reconstitution

• Draw your desired volume of diluent into a sterile syringe. A common starting concentration for research applications is 100 mcg per 100 μL of diluent, yielding a 1 mg/mL stock solution.

• Insert the needle and slowly inject the diluent against the inner glass wall. Do not spray directly onto the lyophilised powder.

• Gently swirl the vial until the solution is clear and fully dissolved. Do not shake vigorously, as shaking can cause denaturation.

Step 4 – Aliquoting & Storage

• Immediately after dissolution, aliquot the reconstituted LR3-IGF-1 into single-use sterile vials to avoid repeated freeze-thaw cycles.

• Store aliquots at –20°C for long-term storage. Avoid repeated freeze-thaw cycles, as this can significantly reduce biological activity.

• Once thawed, store at 2‑8°C and use within a short period.

Concentration Reference Table

*Adjust diluent volume based on your experimental requirements. For cell culture applications, further dilute to working concentrations (typically 10–100 ng/mL).*

Storage & Stability Guidelines FOR Receptor Grade IGF-1 LR3 (100mcg)

Why Choose Wuhan Top Miracle Peptides for Receptor Grade IGF-1 LR3 (100mcg)?

As an authentic licensed peptide supplier based in the United Kingdom, we supply Receptor Grade IGF-1 LR3 (100mcg) and a wide range of research-grade compounds under rigorous quality assurance protocols, fully aligned with Google’s E‑E‑A‑T standards.

• Verified Purity: Independent HPLC and SDS-PAGE analysis with purity guaranteed ≥95% for every batch.

• Biological Activity Verified: Each batch is tested for biological activity (ED₅₀ ≤ 10 ng/ml) to ensure consistent performance.

• Low Endotoxin: Endotoxin levels are maintained at < 0.1 EU/μg.

• GMP‑Compliant Manufacturing: All proteins are produced in ISO 13485:2016 and GMP‑certified facilities.

• Full Traceability: Batch‑specific Certificates of Analysis (COA) are available for every order.

• Wholesale Supply: We serve research institutions, laboratories, and wholesale buyers across the UK, EU, and USA with flexible volume pricing and reliable logistics.

• UK‑Based Regulatory Compliance: All products are supplied strictly as research-grade reagents for laboratory use only (RUO).

FAQ: Receptor Grade IGF-1 LR3 (100mcg) Research Peptide

 What is Receptor Grade IGF-1 LR3 (100mcg)?
Receptor Grade IGF-1 LR3 is a synthetic analogue of human IGF-1 with enhanced biological potency. It contains an arginine substitution at position 3 and a 13-amino-acid N-terminal extension, which significantly reduce binding to IGF-binding proteins and prolong its half-life.

What is the molecular weight of IGF-1 LR3?
The molecular weight is approximately 9.1 kDa (9110.6 ± 2 Da).

 What are the primary research applications for IGF-1 LR3?
IGF-1 LR3 is used in cell proliferation and survival studies, IGF receptor and signal transduction research, stem cell and regenerative medicine research, neuroscience and neuroprotection studies, muscle, bone and cartilage research, and biopharmaceutical manufacturing optimisation.

How does IGF-1 LR3 differ from native IGF-1?
IGF-1 LR3 has >100-fold reduced affinity for IGF-binding proteins (IGFBPs) compared to native IGF-1. This results in enhanced potency, a significantly prolonged half-life, and sustained receptor activation in cell culture and experimental models.

 What purity does your Receptor Grade IGF-1 LR3 (100mcg) meet?
Our IGF-1 LR3 is tested to ≥95% purity by SDS-PAGE and HPLC. A Certificate of Analysis (COA) is supplied with every order.

How should I reconstitute Receptor Grade IGF-1 LR3 (100mcg)?
Reconstitute with sterile 0.1M acetic acid or sterile PBS (pH 5‑7) containing 0.1% carrier protein (e.g., BSA) to prevent adsorption. Allow the vial to reach room temperature, then slowly inject the diluent against the inner glass wall and swirl gently. Do not shake.

 How should I store reconstituted IGF-1 LR3?
Reconstituted IGF-1 LR3 should be aliquoted into single-use vials and stored at –20°C for long-term storage. Avoid repeated freeze-thaw cycles. Including a carrier protein (0.1% BSA or HSA) in the reconstitution buffer is recommended to prevent loss due to adsorption.

Is Receptor Grade IGF-1 LR3 research reagent legal to purchase in the UK?
Yes. Receptor Grade IGF-1 LR3 is a laboratory reagent sold for research use only (RUO). It is fully legal to purchase, possess, and use in the United Kingdom for legitimate in‑vitro or in‑vivo scientific research, provided it is not marketed with therapeutic claims.

 What is the difference between Receptor Grade and Media Grade IGF-1 LR3?
Receptor Grade is a high-quality research reagent for studies on cell growth, IGF receptors and IGF binding proteins. Media Grade is designed for commercial cell culture applications at a more economical cost for studies requiring larger quantities.

 Does Wuhan Top Miracle Peptides ship internationally?
Yes. We ship across the EU (France, Germany, Spain, Sweden, Italy) and to the USA from our UK warehouse. Wholesale pricing is available for bulk orders.

Wholesale IGF-1 LR3 100mcg Supply Across the UK and Europe

Wuhan Top Miracle Peptides supports wholesale peptide buyers in the United Kingdom and international markets.

We Support Enquiries From:

• United Kingdom
• France
• Germany
• Spain
• Sweden
• Italy
• USA
• Wider Europe

For larger IGF-1 LR3 100mcg enquiries, contact our team before ordering. This helps confirm stock, wholesale pricing, documentation, shipping options, and buyer verification requirements.

Where to Source Receptor Grade IGF-1 LR3 (100mcg) in the UK

If you are searching for where to source Receptor Grade IGF-1 LR3 (100mcg) in the UK, Wuhan Top Miracle Peptides provides a simple professional enquiry process.

Professional Enquiry Process

1. Review the IGF-1 LR3 100mcg product details.
2. Check the current label and batch information.
3. Confirm the product identity from documentation.
4. Contact our team for availability.
5. Ask about COA and purity-related documentation.
6. Confirm your shipping country.
7. Discuss wholesale quantity requirements.
8. Complete buyer verification where required.

 

Bulk Peptides Page
Shipping & Returns Page
Contact Us Page
Shop Page
Quality / Compliance Page
Google Search Central
GOV.UK / MHRA
ASA / CAP Code Section 12
Scientific reference source such as PubMed, NCBI, or a validated protein database

From its innovative design as a long-acting IGF-1 analogue with dramatically reduced IGFBP binding to its well-documented role in activating the PI3K/AKT and ERK1/2 signalling pathways, Receptor Grade IGF-1 LR3 (100mcg) provides a uniquely potent and sustained platform for advanced cellular and molecular research. Its ability to drive robust cell proliferation, promote survival through apoptosis inhibition, and support stem cell expansion—supported by decades of peer‑reviewed research and validated biological activity—makes it an essential addition to any laboratory investigating growth factor signalling, regenerative biology, or cell culture optimisation. By choosing high‑purity, lab‑verified Receptor Grade IGF-1 LR3 (100mcg) from Wuhan Top Miracle Peptides, you ensure that your research is built on a foundation of quality, reproducibility, and scientific integrity.

Ready to advance your research with Receptor Grade IGF-1 LR3 (100mcg)? Browse our product catalogue, request a wholesale quote, or contact our support team today to discuss your laboratory’s specific needs. Place your order now and receive GMP‑grade IGF-1 LR3 delivered directly to your facility in the UK, EU, or USA.